We are late in heading back to the UP.
An update on the operations, developments, and plans for 2023.
A month longer than planned, Maycee and I long for the 2023 return to Michigan’s Upper Peninsula.
In 2023, we tent camped for 13 weeks and 4 days on my dad’s 40 acres of rural forest land near Marquette, the largest city in the Upper Peninsula of Michigan. Twenty-four thousand people live in Marquette.
Upon making our return, we will resume our off-grid living adventures. Our time there is anything but a typical Upper Peninsula Michigan vacation.
We don’t spend a great amount of time visiting Upper Peninsula attractions. Of course, other than the ones in the Marquette area.
No matter though. If you check out my YouTube channel you’ll see we have plenty of adventure on our own.
The longer we are away the higher the level of “overwhelm” I feel increases.
Many things delay the road trip to the UP at present.
- Finishing the overhaul of donaldjclaxton.com
- Editing several YouTube videos from last year’s video cache
- Finishing repair or making of timber frame tools we’ll need when we get there.
- Developing some plans to use for timber frame projects to do this year.
- Figuring out better ways to supply power and water to our new site in the woods.
- Getting packed and on the road.
Ugh! But what about more words on the page?!
These activities also include generating a massive amount of content before we go to the UP.
I need four more iterations of myself to tie up presentations, tools, and more.
Let me rephrase that. I need four or five others who know much more than me, to work things into shape!
Overhauling donaldjclaxton.com by using Divi and WordPress tools.
I’ve been working on overhauling donaldjclaxton.com for months.
Months, I tell you!
My family and friends as me what I’m doing today: the answer is always the same of late.
I’m working on the website.
Learning new ways to use the Divi Builder.
In the last month and a half, I’ve learned that many things I was attempting to do with the site were wasting my time.
Many aspects of the Divi Theme Builder, made by Elegant Themes, improved over the last year.
Many of them while Maycee and I were out in the woods. (Disclosure: This link to Elegant Themes website is an affiliate link. If you buy Divi, I may receive compensation from the company at no expense to you.)
This, while the ironic point is, has not been, “easy.”
As with off-grid life, completing one thing requires finishing 20 or 30 more before the intended task.
YouTubers who focus on Divi.
But I have learned much from each of the following YouTubers. Thank you to all, you’ve been so very helpful.
Particularly Mak, and Natalia.
Each YouTube channel will help you get your head around advancements to the Divi Builder.
Speaking of YouTube…
Here’s how to watch last year’s videos from the UP.
Last summer brought an increase in subscribers to my YouTube Channel @DonaldjClaxton.
While overwintering in the South, I thought there’d be much more time to get to the catalog of raw clips needing editing and posting.
Unfortunately, between learning all I can about as much as I could, I’ve not gotten to them yet! But they’re coming.
This summer, I’ll also be adding drone footage from above the trees. (Get an FCC Remote Pilot License aka Part 107 Certificate, and practice flying the thing!)
Timber frame vintage hand tools repair, sharpening, and making
This also included binge-watching Trustin Timber and his Canadian modular log cabin build.
To his credit, I’ve emailed Trustin twice and he’s responded in about five minutes each time. I appreciate him making himself available like this. I really, really do.
My 2023 timber frame plans
Over the last six months, viewership of other channels has taught me so much about building timber frame shelters and small projects.
This also has led to finding vintage hand tools via eBay and at any flea market I pass.
I’ve saved tons on buying from these sources.
Tons, I tell ya!
Mr. Chickadee, the best YouTube to watch to learn about timber framing.
Hands down, the best, rugged force in building timber frame anything(s), is Mr. Chickadee. He is an ex-US Marine who moved from California with his wife to a small farm in Kentucky.
This ex-Marine has read every how-to book there must be on the art and skill of timber framing.
Sure, there are commercial enterprises out there offering incredible services, but just as Shawn James and Trustin Timber et al. are you there specializing in building log cabins, Mr. Chickadee rules the roost as far as I’m concerned. Millions of others seem to agree, too.
Mr. Chickadee includes techniques he’s learned and studied by the Japanese, Chinese, and Koreans.
Know how to do a “kerf to the pith” to keep timbers from cracking or checking as the green wood dries out?
He is the only one I’ve found in hours and hours of searching who even knows, and teaches, how to construct one, and he doesn’t even include it on his own channel!
This is not an exaggeration. And it’s the solution to a lot of problems.
What is a kerf to the pith?
Mr. Chickadee claims it is a practice from Southwest Asia. One that’s quite old.
You may not also know that there are structures in Japan, China, and Korea that have stood the test of time.
Estimates say they are 1,300 years old and likely will survive at least another 800 years.
In a nutshell, a “kerf to the pith” is a 3/4’s-inch cut in the southern face of a timber beam or post, that creates a channel for moisture to escape and not cause structural integrity or cosmetic appearances of the wood.
On a tour of the property he teaches on, Mr. Chickadee points this out, almost as an “Oh, by the way.”
But this is a BIG deal for anyone whose cut wet timber and tried to do something with it.
In fact, many local ordinances across the United States prohibit the use of wood that has a large moisture content.
Because as wet wood, aka, greenwood, ages, the fibers shrink and also may twist.
This cut to the pith of the wood provides a place for the sap and water in a timber post or beam to evaporate out of the wood near the same rate as the wood on the outside.
A kerf to the pitch reduces the chance of cracks and checking happening in large timber posts and beams.
My vintage hand tools collection.
I’ve tapped into a gold mine of treasures in regard to collecting, restoring, and using vintage hand tools.
- Peavey or Kant head–just need to cut a piece of oak when I get to the UP and fashion it to fit
All of them are well over 60 years old and in all probability, closing in or exceeding 100 years.
You see, in the woods, there aren’t all that many trees one can plug into and receive power from. And, to boot, as far off the beaten path our camp sits, there are no power lines either.
So in large part, what I use out there is hand tools. And we all know today’s made-in-China tools aren’t built to last 10 minutes.
Steel and iron may be a lot heavier, but the tools I have weathered time well.
Creating plans for the planned projects for this year.
The summer of 2022 in the UP became a lesson and reminder of what I didn’t know about what I didn’t know.
Maybe you have discovered times in your life when you’ve faced this, too.
We drove into the woods last summer with limited tools and resources. We made good and survived for 13 weeks and four days.
In 2023, I expect to find write the next chapters of “More About What You Don’t Know About What You Don’t Know.”
Last year I found the top of a steep grade where it’d be nice to camp and enjoy the summers.
My plans this year include doing more to establish this site.
- Sheds that measure 12′ x 16′ because they do not require permits to add out there in the woods.
- An outdoor kitchen
- A shower house
- Rainwater capture system
- Expanded solar and electric capabilities
- Some semblance of a garden
- Perimeter fencing to keep Maycee in and bears, deer, rodents, and uninvited humans out.
We did without these things last year.
As John Lennon once sang as a member of The Beatles, “Not a second time….”
What to do about off-grid power, water, and waste management.
As I mentioned above, the elephant in the woods comes in the shape of these three elements.
UP power sources in the woods.
Last year we began with absolutely no solar last year.
By the end of the summer, we were using a 300 Watt power portable inverter. This absolutely saved the day.
But I’ve been using the Renogy power needs calculator and come to realize that to do most of what I “need” out in the wood puts me somewhere at 5000 Watt-hours per day.
In essence, that means having a bank of some 50 solar panels to even get close!
That’s not about to happen either.
This means complementing the power load with additional sources–wind, hydro, and thermal.
Going in this direction also gets tricky because these other sources generate electricity differently from solar.
What I’m saying is you don’t walk out into the woods, plop down a wind turbine, dangle a few wires from a pole, and connect them to the same box that’s feeding a 300 Watt inverter.
So, I’m completing my plans for how to make this work.
Water sources in the woods of the UP
Water is one of the four basic needs of human and dog life.
Last summer, I made a habit of buying more water each time we ventured into Marquette, Michigan, a fair drive from our remote location.
On average, I kept a minimum of 10 gallons on hand at all times.
That worked for me and Maycee, but this also created limitations.
A couple of times I was able to “shower” by standing out in the rain and giving myself a wash.
Rainwater, even in the summer in the UP, doesn’t get all that hot.
2023 hydration and irrigation plans
Thanks to Katie and Greg from This Off-Grid Life on YouTube, I learned this winter about “ram pumps.”
Katie mentioned that they had seen a video from a family in Panama using one. This led to watching multiple videos of The Nomadic Movement.
How ram pumps work.
It’s a matter of physics, but basically, hydraulic pressure, free from the need for electricity, pushes captured running water high up a hill and over crazy terrain.
You can watch the video below for more. They’re not expensive to build, PVC pipe and hoses are probably the greatest costs.
Aside from the shameless sexual exploitation of this married mom’s nipples, (yesterday morning was a thumbnail of her in purple leggings that featured every nanometer of the place God split her), their ram pump worked and delivers water uphill. If Little Red Riding Hood’s grandma lived in their house in Panama, (not Florida) this would give new meaning to the phrase, “Over the river and through the woods….”
That was a cool video, where do I buy a ram pump and how much are they?
The DIY ram pump in The Nomadic Movement‘s video costs somewhere around $130 US to build. (Seriously, y’all down in Panama, I’m sickened by the regular vulgar exploitation of your wife, Kaylee. Stop it.)
eBay has various-priced ram pumps for sale, pre-made.
This would be a plug-and-play deal, with a little bit of work.
A couple of springs on the land in the Upper Peninsula would lend to this project.
How close they are to the hill remains to be seen. At one point, I calculated that it was 1,400 feet from one spring I located last year.
I need to find springs closer to the hill if I go in this direction.
The 2023 waste management plan
This goes beyond packing one’s trash.
Yes, I packed our trash and hauled it out.
But aside from walking around with a little trowel all the time for other wastes, well, one of the first things to do upon arrival is to construct a compost toilet.
There are still a few issues to resolve, but for the urine converter, I’ve found a couple of alternatives that will work, for free.
Getting packed and on the road.
Like most living off the grid, I’m loading as much as possible into tubs and wooden crates.
This will make them easier, and more difficult, to all load into my Chevy Traverse.
What won’t cram into one of the containers will stay rolled up or folded and then crammed into gaps.
The critical part is leaving and having enough room in the back for Her Majesty, Maycee Grace.
Maycee is on the large side of most Great Pyrenees. So she takes up about 8 cubic feet, at the least, in the back. If only I could strap her onto the car’s top!
We’ll get things loaded, but it’s going to take some tier-building and effort.
I look forward to leaving the hot and muggy South behind and our return trip to the UP.
My “To Do” list shortens, and then just as many, and more items, appear.
The other day I told Maycee I’m going to reach a point real soon when I rip the scab off, and northward we will be on the way to the UP.
My chores will get done; Not in my time, but in God’s.
Here I witness to you. Since my back injury in May 2016, God has taught me much about patience.
That things happen in his time, not mine.
Many of us seem to find learning to “let go, and let God,” difficult.
A blurred line often exists between “reasonable” and “going too far” with the concept.
Google Bard v. Open.ai’s ChatGPT Advice.
Last Thursday I gave my list of to-dos to the task managers available in Google’s Bard and ChatGPT.
Rest assured, this article was not written by generative artificial intelligence. No, not one word.
I’ve experimented with these products a great deal in 2023. More to follow about this, too.
My point is, however, I’m working my lists in the order of importance suggested by each large language model.
Thanks for reading. Please join my email list, you’ll see a signup form in the footer below.
I look forward to getting to the UP and getting busy.